Medfusion 2010i

Description

Overall Size: 4.5″ W X 3.0″ H X 7.5″ L

Weight: 2.5 pounds

Power: AC Adapter, DC Internal rechargeable batteries

Recharge Time: 16 hours (with pump turned off)

Battery Capacity: At 25° C, a 16 hour charge will operate the pump for at least 10 hours at 5.0 ml/hr using a 60 ml syringe.

Accuracy: ± 3%, excluding syringe variations

Infusion Modes: Continuous, Volume Over Time, Body Weight and Mass modes

Flow Rate: 0.01 to 378.0 ml/hr dependent upon syringe size selected

Bolus Delivery: Modes that allow bolus are Body Weight, Mass and Continuous

Syringe Selection:

• • Becton-Dickinson (B-D)® 1, 3, 5, 10, 20, 30, 60 ml
  • Monoject^® (Mono) 1, 3, 6, 12, 20, 35, 60 ml
  • Terumo^® (Teru) 1, 3, 5, 10, 20, 30, 60 ml
  • Becton-Dickinson Glass (BD-G) 1, 3, 5, 10 ml
  • Abbott (Abot) 50 ml (Abboject)
  • *Automatically senses syringe size (except for B-D 1 cc Luer-lock syringe)

Syringe Fill Volume: All syringe sizes will fill to maximum stated volumes

Total Volume Delivered:

• • 0000 to 9999.9999 MG
  • 00 to 9999.99 ml
  • 0000 to 9999.9999 U

Alarms/Alerts

Alarms/Alerts:
– Near Empty (5 to 60 minutes)
– Empty
– Dose Volume Delivered
– Bolus Complete
– Bolus Delivery
– Occlusion
– System Malfunction
– Low Battery
– Depleted Battery
– Syringe Pops Out
– Invalid Size
– Invalid Number
– Check Clutch
– Alarm Temporary Delay: 2 or 60 minutes
– Alarm Audio Volume: Soft or Loud
– Load Syringe Plunger

Status Alerts (Visual, non-audible):
– Stop/Program
– Deliver
– Battery in Use, Charging and Depleted
– Priming
– Standby Mode
– Back Light

Download the operator’s Manual

https://web.facebook.com/infusionpumprepair/photos/a.101426038761773/102765931961117